The Green Procurement Guide

A tool that helps you implement sustainable procurement processes. Read the instructions for an explanation on how to use the tool.

112 criteria found

Skip to view results
Filter

Equipment

Specifically for sterilisation and disinfection of equipment: Energy management

co2
circulair
More information Less information
Criterion type
Technical requirements
Text

Sterilisation and disinfection equipment consumes water and energy efficiently. Equipment offers the option of reusing water and condensate. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Life Cycle Assessment (LCA) & Ecodesign 

co2
circulair
More information Less information
Criterion type
Award criteria
Text

The Tenderer supplies a complete, transparent and verifiable Life Cycle Assessment (LCA) for the offered product when submitting the tender. If the scope covers multiple product types, the types for which separate LCAs are to be submitted will be discussed.  

  • The LCA must be prepared for the specific product offered in response to this invitation to tender.

Standards and methodology 
The LCA must be prepared in accordance with ISO 14040/14044 and the climate impact (CO₂eq) must be calculated in accordance with the GHG Protocol or a comparable standard. An externally validated LCA in accordance with ISO 14067 may score higher.

  • ISO 14040 Environmental management – Life cycle assessment – Principles and framework.
  • ISO 14044 Environmental management – Life cycle assessment – Requirements and guidelines.
  • ISO 14067 Greenhouse gases – Carbon footprint of products – Requirements and guidelines for quantification.

Life cycle phases 
For all phases of the life cycle, the LCA must cover:

  • raw material extraction 
  • production 
  • transport (upstream + downstream) 
  • use 
  • end of life (mandatory: scenarios, processing, hotspots)

Transparency & assumptions 
The LCA must clearly indicate:

  • the functional unit (e.g. per product or per 1,000 uses) 
  • use assumptions (frequency, parameters, lifespan) 
  • software used + version and database + version 
  • system boundaries, modelling and allocations 
  • distinction between empirical and modelled data 
    NDA-sensitive information that is not relevant for the determination of the environmental impact need not be supplied.

Climate impact 
The total impact of carbon emissions must be shown and must be broken down for all phases.

Ecodesign process 
The Tenderer must show that a formalised ecodesign process exists, for example with internal procedures or (if available) ISO 14006 documentation.

Applicable forms of evidence

Requesting an example of an LCA. 

Assessment method

Verification of the evidence. Complies with all requirements: yes/no.

Contractual provision

Additional contractual provisions include:

  • Periodic discussions will take place between the Tenderer and Client concerning the objectives in the action plan.
  • The sustainability plan will be developed further during the contract term.
Explanation for procuring organisation

Although ISO 14040 is not yet mandated by legislation, the goal is to apply it to achieve a transparent LCA. This contributes to standardisation and uniformity by means of references to standards. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Warranty of at least 5 years on product

circulair
More information Less information
Criterion type
Technical requirements
Text

The warranty period for the supplied products is at least 5 years. Defects that arise during this period must be repaired without charge. If the defect cannot be repaired, the product must be replaced without charge. The Tenderer must ensure that spare parts are available for at least 10 years after the date of purchase. These may be supplied by the Tenderer directly or through an intermediary.

Explanation for procuring organisation

Buyers, be aware: this criterion only applies to purchase agreements, excluding maintenance.

Sources
MVI criteria tool
EU GPP 2017
Copy link

Circular Product Passport scores higher

co2
circulair
More information Less information
Criterion type
Award criteria
Text

If the Tenderer offers only products with a Circular Product Passport, also known as a raw materials or materials passport, the tender scores higher. Circular Product Passports contain at least:

  • The product group of the supplied product.
  • The raw materials and other materials used.

Circular Product Passports may also be supplied digitally, for example in an online portal or blockchain tool.

Circular Product Passports must contain at least the following elements:

A. Raw materials
B. Environmental impact
C. Value retention

Applicable forms of evidence

Circular product passport (or similar form of evidence) for all products.

Explanation for procuring organisation

Please note: this only applies to multi-year contractual relationships.

The Circular Product Passport must contain at least the following elements:

A. Raw materials
A1. Composition of raw materials
A1.1 A list of all the raw materials included in the product with their masses in grams.
A1.2 A list of all the recycled raw materials included in the product with their masses in grams and as a % of the total mass.
A1.3 A list of all critical raw materials included in the product with their masses in grams. Critical raw materials are understood to mean the 26 critical raw materials specified in the list published by the European Commission: Study on the review of the list of Critical Raw Materials, European Commission, p. 11.
A1.4 A list of all Substances of Very High Concern (SVHCs) included in the product with their masses in grams. The number of SVHCs identified so far is 1576. These are listed in the SVHC list on the RIVM Risks of Substances (Risico’s van Stoffen) website. This list is updated twice annually.
A2. Recovery of raw materials during recycling.
A2.1 A list of all recovered raw materials in grams and as a percentage (%) of the original mass included in the product in grams.
A2.2 A list of all recovered critical raw materials in grams and as a percentage (%) of the original mass included in the product in grams.
A3. Composition of auxiliary resources.
A3.1 A list of the required auxiliary resources in grams during the complete life cycle. Auxiliary resources are those required to produce a product that do not form part of the product itself. They include machinery, buildings, vehicles, support equipment, fossil fuels, water, sand, residues from smelters and refineries, complex mining concentrates and residues and production waste.

B. Environmental impact
B1. A life cycle analysis (LCA) in accordance with the Socially Responsible Procurement (Maatschappelijk Verantwoord inkopen, MVI) criterion ‘Life cycle analysis (LCA) is mandatory’. The LCA results include at least the climate impact or carbon footprint, expressed in CO2 equivalent units, calculated in accordance with the guidelines in the Greenhouse Gas Protocol: 'Product Life Cycle Accounting and Reporting Standard' or comparable guidelines that clearly define the scope.
B2. The impact of the life cycle of a product on biodiversity. Biodiversity is a term that we use to indicate the rich variation of nature. It covers the great variety of animals, plants, fungi, habitats and ecosystems.
Two methods to determine the impact of companies or their products and services on biodiversity are GLOBIO and ReCiPe. For more information, we also refer you to the research carried out on behalf of the Platform for Biodiversity, Ecosystems and Economy (Platform Biodiversiteit, Ecosystemen en Economie).

C. Value retention
C1. Lifespan.
C1.1 The actual lifespan in years including reuse (if applicable). The lifespan is the total use phase of the product in years.
C1.2 Product warranty in years (possibly statutorily determined).
C1.3 Number of years of full product support offered, including (preventive) maintenance, repair, availability of spare parts.
C1.4 Number of years of software support offered (updates and upgrades).
C2. Use of used parts.
C2.1 An explanation of the extent to which parts of the product can be and/or are reused at the moment that the product is no longer usable. For example % reuse of parts, list of reused parts, application of reused parts.
C3. Use of recycled raw materials.
C3.1 An explanation of the application for which the raw materials recovered by recycling are used. The extent to which the recycled raw materials are used for a higher value, equal value or a lower value application.
C4. Use of alternative raw materials.
C4.1 An explanation of the use of alternative raw materials/auxiliary resources to avoid the use of critical and scarce raw materials.

Sources
MVI criteria tool
Copy link

Contribution to circularity goals

circulair
More information Less information
Criterion type
Award criteria
Text

The Tenderer indicates how it will contribute to the circular economy during the contract term and how it will avoid contributing to the exhaustion of primary raw materials (oil, gas, stone etc.). This must align with the goals in the Sustainable Care Green Deal (Green Deal Duurzame Zorg).

The Tenderer and Client will agree a circularity goal for the product, after which the Tenderer will indicate the specific measures that will be taken to achieve this goal and the expected result.

Assessment method

Assessment of the extent to which the Tenderer:

  • Provides clear and specific information about the measures it has implemented.
  • Convincingly demonstrates the feasibility of implementing and monitoring the measures.
  • Convincingly demonstrates that the measures contribute to the objective.
Explanation for procuring organisation

Please note: this only applies to multi-year contractual relationships.

The procuring organisation may choose to adopt the following text. Fill in the sections of text marked in blue.

[Healthcare or social care organisation] contributes to the circular economy by avoiding contributing to the exhaustion of (valuable) primary raw materials in accordance with the objectives in the Sustainable Care Green Deal (Green Deal Duurzame Zorg).

For the category [enter product], this is expressed in the following ambitions: 

[add]
The Tenderer must indicate how it will contribute to this during the contact term in specific terms: in which way (which measures) and to achieve which (expected) result? 

Sources
UMC Utrecht
Copy link

Reducing carbon emissions during contract term

co2
More information Less information
Criterion type
Award criteria
Text

The Tenderer indicates how it will reduce carbon emissions during the contract term in both the supply chain and during use of the product(s) and services. The Tenderer also indicates how it will take account of this in the contract management process.

Applicable forms of evidence

In compliance with SBTi or comparable reports.

Assessment method

Assessment of the extent to which the Tenderer:

  • Provides clear and specific information about the measures it has implemented.
  • Convincingly demonstrates that the measures are feasible and can be implemented in practice.
  • Convincingly demonstrates that the measures contribute to a reduction in carbon emissions.
Sources
UMC Utrecht
Copy link

Acceptance of product returns

circulair
More information Less information
Criterion type
Award criteria
Text

The Tenderer must have a programme in place for the reuse of equipment, parts and components of the products covered by the invitation to tender. 

Assessment method

This part of the tender scores higher if: 

  • The Tenderer recycles a high percentage of the product. 
  • The products are reused in a way that retains their value as much as possible. 
Explanation for procuring organisation

Please note: only include this criterion if the collection of the products at the end of their lifespan is part of the invitation to tender. 

The R ladder is used to assess whether the use of collected products is high value or low value. The high value strategies Reuse (3), Repair (4), Refurbish and Remanufacture (5) and Repurpose (6) in particular are relevant in this case, as they focus on reuse, repair or upcycling of the collected products. These phases give the best insight into the extent to which products are used for high value applications after they are returned. 

Step 0 is the highest step on the ladder and step 8 is the lowest. The higher the step, the higher the value of and therefore the more sustainable the application.

Sources
MVI criteria tool
Copy link

Life cycle analysis of equipment

circulair
More information Less information
Criterion type
Award criteria
Text

The Tenderer supplies a life cycle analysis (LCA) that explains the environmental impact of the equipment. LCAs must contain at least a summary of the materials used and the energy consumption of the equipment.

An equivalent device that measures the environmental impact may also be supplied, provided that it complies with the ISO/IEC 62430 standard. An LCA may be unnecessary for equipment that has been on the market for a long period of time. 

Applicable forms of evidence

LCA or equivalent tool that complies with ISO/IEC 62430 Environmentally conscious design (ECD) – Principles, requirements and guidance. 

Contractual provision

This requirement must be included in the contract as a contractual provision. Additional contractual provisions include:

  • Periodic discussions will take place between the Tenderer and Client concerning the objectives in the action plan.
  • The sustainability plan will be developed further during the contract term.
Explanation for procuring organisation

Please note: this only applies to multi-year contractual relationships.

A life cycle analysis (LCA) is a quantitative method used to determine the environmental impact and environmental hotspots throughout the entire life cycle of equipment. The Tenderer may also use it to substantiate claims. The insights provided by the LCA are used to develop an action plan or to guide decisions during future procurement processes to make these processes more sustainable.

The Client may include the following text in the invitation to tender. Because the text is not applicable in some cases, for example if a reseller is contracted, it has not been included in this criterion as standard.

“The Tenderer will also supply an action plan to increase sustainability that is (also) applicable to the type of product in the invitation to tender. The action plan must explain at least the origin of materials, energy consumption during production and energy consumption during use. The action plan covers new products for which the design phase has not yet started at the time of award and therefore does not cover products that are already in development.” 

Sources
MEPA+
Copy link

Energy management: basic

co2
More information Less information
Criterion type
Technical requirements
Text

The Tenderer must implement a management system that makes the organisation more energy efficient. This system must cover business locations and logistics.

Applicable forms of evidence

External accreditation/verification, for example the Science-Based Targets initiative (SBTi) or Carbon Disclosure Project (CDP).

Sources
MEPA+
Copy link

Energy management: intermediate

co2
More information Less information
Criterion type
Technical requirements
Text

The Tenderer must implement a management system that makes the organisation more energy efficient. This system must cover business locations and product design.

Applicable forms of evidence

The Tenderer must implement a management system that makes the organisation more energy efficient. This system must cover business locations and product design.

Sources
MEPA+
Copy link

Energy management: advanced

co2
More information Less information
Criterion type
Technical requirements
Text

The Tenderer must implement a management system that makes the organisation more energy efficient. The system must cover the business location, operating theatres, product design and supply chain.

Applicable forms of evidence

External accreditation/verification, for example the Science-Based Targets initiative (SBTi) or Carbon Disclosure Project (CDP).

Sources
MEPA+
Copy link

Specifically for sterilisation and disinfection of equipment: Heat-resistant material

co2
circulair
More information Less information
Criterion type
Technical requirements
Text

Materials in sterilisation and disinfection equipment can withstand high temperatures to prevent rapid degradation.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Product warranty

circulair
More information Less information
Criterion type
Technical requirements
Text

The Contractor provides a warranty of at least [x] years after delivery, with the warranty included in the price of the product. The warranty requires that the products comply with the specifications in the contract (e.g. without defects or deficiencies). Repairs will be made without charge (including transport and shipping costs) and within 5 working days of the defect being reported.

Explanation for procuring organisation

The procuring organisation is responsible for choosing a warranty period.

Sources
MVI criteria tool
Copy link

Value retention of equipment

circulair
More information Less information
Criterion type
Award criteria
Text

Equipment that retains a high proportion of its value scores higher. The Tenderer must supply an action plan formulated in SMART terms that explains how it will contribute to ensuring that the equipment retains its value. This plan is supplementary to the minimum requirements in the Schedule of Requirements (SoR).

Applicable forms of evidence

SMART action plan

Assessment method

Assessment of the following points: 

  • The longer the product warranty, the higher the score.
  • The longer the product support, the higher the score.
  • The longer the software support, the higher the score.
  • Parts of equipment are easy to disassemble.
  • Long-term availability of spare parts.
  • SMART description of the options for reuse.
  • SMART description of the options for recycling.
Explanation for procuring organisation

Value retention: the lifespan of the equipment during use and the way in which it is reused after the use phase.

The action plan covers the following points:

  1. Extended product warranty: the number of years by which the warranty is extended beyond the standard warranty period. 
  2. Extended product support: the number of years that the product support, including maintenance, repairs and the availability of spare parts, is extended beyond the standard period.
  3. Duration of software support: the number of years during which software updates and upgrades are guaranteed.
  4. Reuse of parts: description of how the product parts will be reused after the end of the product lifespan. Specify here: the percentage of reusable parts, a list of the reusable parts and the applications of the reused parts.
  5. Recycling of raw materials: description of how raw materials will be recycled following the end of the product lifespan. Specify whether this will involve high value, equal value or low value recycling.
  6. Extra contribution to value retention: description of additional measures taken to guarantee high value retention of the product.
Sources
UMC Utrecht
Copy link

Equipment packaging

circulair
More information Less information
Criterion type
Award criteria
Text

Packaging complies with the requirements of the EU Packaging and Packaging Waste Regulation (PPWR). This means that packaging must be fully recyclable from 2030 (except for contact-sensitive packaging). The tender will be assessed based on the action plan submitted by the Tenderer. 

Assessment method

Action plan 

Explanation for procuring organisation

The Packaging and Packaging Waste Regulation (PPWR) is a European regulation intended to reduce the volume of packaging and to promote the reuse and recycling of packaging. The first measures will come into force in August 2026. From 2030, rules including the following will apply: at least 40% of packaging must be reusable, single-use plastic packaging will be banned and the empty space in packaging must not exceed 50%. More information can be found at: 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Separability of parts

circulair
More information Less information
Criterion type
Technical requirements
Text

The device must be designed to allow materials to be separated to permit recycling.

Assessment method
  • Device consists of a single material: 5 points
  • Multiple materials with certified separation procedure: 2 points  
  • Extra point if the separation procedure is supplied with the product: +1 point
  • Multiple materials, not separable: 0 points 
Sources
Resah/Anfor
Copy link

Specifically for infusion pumps: Dosing and accurate dispensing

circulair
More information Less information
Criterion type
Technical requirements
Text

Infusion pumps dose accurately to reduce waste.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for medical freezers: Coolant

co2
More information Less information
Criterion type
Award criteria
Text

This part of the tender scores higher if the equipment contains a coolant with a GWP100 that is <10. 

Assessment method

Applicable forms of evidence:
Documentation that shows which coolants are used and their GWP100.

The scoring method has not yet been determined.

Explanation for procuring organisation

The GWP100 (Global Warming Potential) is a measure of the contribution made by a gas to the greenhouse effect over a period of 100 years compared to CO2 (which has a GWP of 1). The lower the GWP value, the less harmful the coolant is to the climate. In this case: equipment scores higher if the coolant has a GWP100 < 10, which means that it makes almost no contribution to global warming (for example natural coolants such as CO2, ammonia or propane).

Sources
Upphandlings Myndigheten
Copy link

Specifically for dialysis equipment: Water consumption

co2
circulair
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the water consumption of the dialysis equipment is limited as much as possible. The Tenderer specifies how much water the machine consumes during the complete treatment cycle.

The cycle consists of the following phases:

  • Test – duration dependent on the machine
  • Filling/Cleaning – 10 minutes
  • Pre-circulation – 15 minutes
  • Dialysis – 4 hours
  • Heat/chemical disinfection – duration dependent on the machine
Applicable forms of evidence

A description of the low flow function. A copy of the manual in which this function is explained is sufficient.

Assessment method

The GWP100 (Global Warming Potential) is a measure of the contribution made by a gas to the greenhouse effect over a period of 100 years compared to CO2 (which has a GWP of 1). The lower the GWP value, the less harmful the coolant is to the climate. In this case: equipment scores higher if the coolant has a GWP100 < 10, which means that it makes almost no contribution to global warming (for example natural coolants such as CO2, ammonia or propane).

Explanation for procuring organisation

On average, 500 litres of water are used during a single dialysis treatment cycle. Optimising the equipment can lead to a saving of 250 litres of (unnecessary) water consumption per treatment.

The treatment cycle complies with IEC 60601-2-16:2018 (Medical electrical equipment – Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment) or an equivalent standard. 

The testing of the machine, the first phase of the treatment cycle, is carried out in accordance with the EN ISO 17025 (General requirements for the competence of testing and calibration laboratories),

U.S. 21 CFR part 820, ISO 13485 (Medical devices – Quality management systems – Requirements for regulatory purposes) standards or an equivalent standard.
 

Sources
Upphandlings Myndigheten
Copy link

Specifically for dialysis equipment: Minimisation of fluid flow

co2
circulair
More information Less information
Criterion type
Award criteria
Text

Dialysis equipment with an automatic mode that minimises the fluid flow between the pre-circulation and dialysis phase scores higher.

The cycle consists of the following phases:

  • Test – duration dependent on the machine
  • Filling/Cleaning – 10 minutes
  • Pre-circulation – 15 minutes
  • Dialysis – 4 hours
  • Heat/chemical disinfection – duration dependent on the machine
Explanation for procuring organisation

This criterion is primarily relevant for equipment that remains operational for long periods, including between treatment cycles. It is less relevant if the machine is only turned on at the moment that the treatment begins.

Sources
Upphandlings Myndigheten
Copy link

Specifically for anaesthetic equipment: Low flow rate

co2
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the anaesthetic equipment has a function that reduces the volume of anaesthetic gas. This may consist of:

  • An automatic low flow function that automatically lowers the flow rate.
  • An informative device that indicates the flow rate, so that the clinician can manually set a low flow rate.
Assessment method

Description of the required low flow modification and automatic low flow functions or informative tools. A copy of the relevant pages of the manual is acceptable.

Explanation for procuring organisation

During normal use, a flow rate of 4-5 litres per minute is usual. The flow rate is the volume of gas that passes a specific point in the tube of the device in a specific period of time. A description of the functions that lower the flow rate: low flow function or the informative device. A copy of the manual in which these functions are explained is sufficient.

Sources
Upphandlings Myndigheten
Copy link

Specifically for anaesthetic equipment: Low flow function

co2
More information Less information
Criterion type
Award criteria
Text

Anaesthetic equipment that is fitted with a low flow function with a maximum flow rate of 2 litres per minute (suitable for long-term and medium-term treatment cycles) scores higher.

Assessment method

Description of the required low flow modification and automatic low flow functions or informative tools. A copy of the relevant pages of the manual is acceptable.

Explanation for procuring organisation

During normal use, a flow rate of 4-5 litres per minute is usual. The flow rate is the volume of gas that passes a specific point in the tube of the device in a specific period of time. A description of the functions that lower the flow rate: low flow function or the informative device. A copy of the manual in which these functions are explained is sufficient.

Sources
Upphandlings Myndigheten
Copy link

Reusable anaesthetic filters

co2
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the noise level of the anaesthetic equipment can be lowered. This contributes to lowering energy consumption. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Efficient air filters

circulair
More information Less information
Criterion type
Technical requirements
Text

Anaesthetic equipment uses air filters with a longer lifespan that are also recyclable. Reusable filters are preferable to disposable filters.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for freezing equipment: Insulation value of enclosure and doors

co2
More information Less information
Criterion type
Technical requirements
Text

Enclosures and doors of freezers in the ultra-low temperature and biomedical categories have a high insulation value. This keeps out heat effectively and limits the energy consumption per cooling cycle.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for freezing equipment: Alarm & monitoring

co2
More information Less information
Criterion type
Technical requirements
Text

Freezers in the ultra-low temperature and biomedical categories are fitted with an alarm and monitoring system to detect temperature changes and to keep energy consumption low.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Recycle-friendly design

circulair
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the device is designed to be easily recycled at the end of its lifespan.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for CT scanners: Radiation efficiency

co2
circulair
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if less X-ray radiation is released during CT scans. The radiation reduction does not affect the image quality of the scan and all diagnostic information remains available to the practitioner.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for CT scanners: CT energy

co2
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the individual parts of the CT scanner can be fully disabled in accordance with  COCIR, as an alternative to stand-by mode.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for MRI systems: Energy management

co2
circulair
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if the energy consumption of the MRI system is clearly shown in accordance with the COCIR 2.0 method. This includes the energy consumption during the scan and in stand-by mode. The Tenderer shows this with an LCA report or other relevant data.

Applicable forms of evidence

LCA report or other relevant data.

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Specifically for MRI systems: Reuse of parts

circulair
More information Less information
Criterion type
Award criteria
Text

The tender scores higher if magnets and other parts of the MRI system can be reused. Extra points are assigned to MRI scanners with a high degree of modularity: parts can easily be replaced. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Training in setting up equipment for energy-efficient use

kennis
co2
More information Less information
Criterion type
Technical requirements
Text

The Tenderer offers end users of the Client a training course (in working language of the institution) in how to set up the equipment for energy-efficient use. This training course devotes attention to optimising the energy parameters, such as the stand-by mode, to reduce electricity consumption. If desired, the training course may be integrated into the clinical and technical training offered by the Tenderer. 

Sources
MEPA+
Copy link

Future availability of spare parts

circulair
More information Less information
Criterion type
Technical requirements
Text

The Tenderer guarantees the availability of suitable spare parts for at least 10 years after the equipment is supplied.

Contractual provision

This can be copied verbatim as a contractual provision.

Explanation for procuring organisation

A different period may be filled in if this is more appropriate.

Sources
MVI criteria tool
Copy link

Instructions for sustainable use of medical equipment

kennis
co2
circulair
More information Less information
Criterion type
Technical requirements
Text

The Tenderer supplies a manual in the working language of the institution with instructions for the sustainable use of the medical equipment.

The manual is intended for users and focuses on reducing the environmental impact. This is achieved through efficiency in energy and water consumption, emissions, consumables and parts. These instructions do not adversely affect the performance of the equipment and apply to the entire life cycle: 

  • Installation. 
  • Use. 
  • Maintenance. 
  • Recycling and removal.

The manual is supplied in a physical and/or digital form at the time of delivery. 

Sources
MEPA+
Copy link

Clear instructions that explain repair options

co2
circulair
kennis
More information Less information
Criterion type
Technical requirements
Text

After the contract is signed, the Tenderer will supply the procuring organisation with instructions in the working language of the institution specifying the best repair options if the product repeatedly shows defects (regardless of whether these defects are covered by the warranty). These instructions must be easy to understand and must explain in detail the steps that the procuring organisation can take in response to each of these defects. If the procuring organisation wishes, these instructions will be discussed during the first month of the contract term at the latest. This may consist of a conversation between the Contractor and the procuring organisation, or the Contractor may ensure that a competent party, such as the brand owner, holds this conversation with the procuring organisation. If the decision is taken to replace the equipment by means of a swap with a used/refurbished/remanufactured model, this may be disregarded (following explicit approval from the procuring organisation). In such cases, the instructions in question need not be made available online.

Explanation for procuring organisation

Suggestion: during the market consultation phase, discuss the options for making additional agreements with market parties, for example extra services that the Tenderer can offer, such as:

  • the option of having defective products collected on location.
  • longer retention of spare parts required for repairs.
Sources
MVI criteria tool
Copy link

Instructions for sustainable use

co2
circulair
kennis
More information Less information
Criterion type
Technical requirements
Text

The Tenderer supplies instructions for sustainable use with the equipment. 

Applicable forms of evidence

The Tenderer may choose to send an example of the instructions first.

Explanation for procuring organisation

These instructions cover:

  • How the equipment must be used to minimise the environmental impact during the installation, use, recycling and end-of-life phases. This information contains instructions to minimise the energy consumption, water consumption, use of disposables and emissions.
  • Recommendations for correct maintenance of the equipment, including information about spare parts that can be used and advice on cleaning the equipment.
  • The precautions that can be taken to avoid contact with substances that are classified as CMR (carcinogenic, mutagenic and reprotoxic), endocrine-disrupting chemicals and substances that may cause an allergic reaction in patients or the user.

The instructions are supplied in a physical or digital manual in the working language of the institution or English.

Sources
Upphandlings Myndigheten
Copy link

Reporting of REACH Candidate List substances

co2
More information Less information
Criterion type
Technical requirements
Text

The Tenderer reports whether the equipment contains chemicals on the REACH Candidate List in accordance with article 33 of the REACH Regulation (SVHCs).

The Tenderer reports the presence of these substances if the concentration exceeds 0.1% (1.000 mg/kg). This does not apply to the equipment as a whole, but to the concentration in each individual part of the equipment.

If the concentration of a substance in a part exceeds 0.1%, the quantity of that substance must be included in the report.

Applicable forms of evidence

Reporting of REACH Candidate List substances in accordance with article 33 of the REACH Regulation (SVHCs). The list that is applicable at the time of the procurement process or invitation to tender is used. 

Contractual provision

If new substances are added to the REACH Candidate List during the contract term, the Tenderer must take account of this addition in the products, documentation and reports covered by this agreement. The Tenderer will implement these changes within a period of six (6) months from the date of publication of the updated REACH Candidate List.

Explanation for procuring organisation

The REACH Candidate List is published by the European Chemicals Agency (ECHA). These are substances classified as ‘Substances of Very High Concern’ (SVHCs). If companies include these substances in their products, they must be transparent about this (article 59 in Declaration (EC) no. 1907/2006 concerning the registration, evaluation, authorisation and restriction of chemicals).

 

Sources
Upphandlings Myndigheten
Copy link

Sleep mode

co2
More information Less information
Criterion type
Technical requirements
Text

The procured equipment automatically switches to sleep mode after [minutes]. While in sleep mode, the equipment remains on and is still connected to the power supply. This means that the equipment continues to function but consumes less electricity. While in sleep mode, the equipment continues to provide the following functionality:

  • The equipment can be turned on again.
  • Information and status of the equipment displayed. 
  • Low power mode. Explanation: A low power mode is an operating mode in which the energy consumption is reduced to a minimum. A device may have several variants of this mode, each with its own energy consumption pattern and a specific recovery time after which the device returns to its full operational capacity.
Applicable forms of evidence

Technical product specifications or other documentation that demonstrates compliance with this criterion or equivalent.

Assessment method

Verification of the evidence. Complies with all requirements: yes/no.

Explanation for procuring organisation

The time before the equipment switches to the sleep mode depends on the equipment type. The duration [in minutes] must be specified in the requirement. If a maximum time applies to the restarting of the equipment, the Tenderer must clearly specify this.

Please note: Depending on the intended use of the equipment, for example for emergency situations or operations, this requirement may be less relevant.

Explanation of low power mode: A device may support multiple low power modes. The sleep mode is generally the most restrictive mode, is intended for longer periods of inactivity and greatly reduces the energy consumption. A device may also have less restrictive modes that are comparable to a hibernation mode, in which the screen is turned off while a core component of the hardware remains active, for example. This allows the device to be fully operational again within a few seconds (e.g. 1–2 seconds). 

Sources
MVI criteria tool
Copy link

Battery removability and service life

circulair
More information Less information
Criterion type
Technical requirements
Text

The Tenderer complies with one of the following criteria:

  1. Removable and replaceable battery
    The battery can be removed and replaced by a professional in accordance with article 11 of the EU Battery Regulation, or
  2. Minimum battery lifespan
    If the battery is not removable and replaceable as described in criterion 1, the equipment has:
    - a minimum lifespan of 5 years, or 
    - a minimum number of charging and discharging cycles that demonstrably complies with the manufacturer’s performance specifications for the intended lifespan. 
Assessment method

Assessment based on confirmation (yes/no question).

Explanation for procuring organisation

Please note: During a market consultation, the Client should identify the usual lifespan of the battery in the equipment. The battery life depends on the type of medical equipment (e.g. the battery life of wearables and Holter monitors cannot be guaranteed for as long due to the effects of patient use). 

Sources
MVI criteria tool
Copy link

Supply chain responsibility

International Social Conditions (Internationale Sociale Voorwaarden, ISVs)

circulair
kennis
More information Less information
Criterion type
Award criteria
Text

The Tenderer complies with the International Social Conditions (Internationale Sociale Voorwaarden, ISVs). These conditions were developed to prevent abuses in the supply chain, including child labour, poverty wages and inhumane working conditions.

The Tenderer commits to the ISVs by carrying out a due diligence process. This will be recorded in the contractual provision for the procurement process. Questions about the application of the ISVs will be asked during the procurement procedure. 

Applicable forms of evidence

Due diligence process:  
1. Risk assessment (no later than 3 months after contract award). 
2. Action plan (no later than 6 months after contract award).  
3. Annual reports (during contract term). 

Contractual provision

The due diligence process complies with the following conditions:

1 Risk assessment of the production chain. The assessment includes the following:  

  • A description of the [first link/links/all the links] in the production process. 
  • An assessment of the risks of violations of labour rights and human rights in the chain.

2 Action plan to mitigate risks. The plan contains: 

  • A summary of the measures that the Tenderer will take to mitigate the risks. 
  • A timetable for the implementation of these measures. 
  • (optional) An explanation of how the action plan was developed, e.g. with information about relevant stakeholders.

3 Annual report on compliance with the International Social Conditions (Internationale Sociale Voorwaarden, ISVs) during the contract term. The report includes: 

  • Risk assessment as described in point 1. 
  • Measures that have been taken as described in point 2. 
  • Strategy and results of compliance with the ISVs. 
  • Information about how signs of violations of the ISVs will be handled, both internally and externally.

The Tenderer may also make use of the following information: 

  • PIANOo (Dutch Public Procurement Expertise Centre) website with information about the ISVs. 
  • OECD due diligence guide for corporate social responsibility. 
  • RBA Practical Guide.
Explanation for procuring organisation

Please note!  

  • Only applies to long-term contractual relationships. 
  • Only applies to product groups with a high risk of abuses: ICT, textiles, coffee. Check the risks at: link to CSR Risk Checker (MVO Risico Checker). 

With the International Social Conditions (Internationale Sociale Voorwaarden, ISVs), the Dutch government aims to tackle abuses in relation to working conditions, human rights and the environment in supply chains. Applying the ISVs involves conducting due diligence: the company identifies the business activities that may affect people and the environment. Measures to prevent these negative consequences are then discussed. More information: see link to PIANOo (Dutch Public Procurement Expertise Centre). 

Sources
MVI criteria tool
Copy link

Code of Conduct

circulair
kennis
More information Less information
Criterion type
Award criteria
Text

Signing of the Code of Conduct

Applicable forms of evidence

Signing of the Code of Conduct

Contractual provision

The Tenderer must indicate how it will contribute to this during the contact term in specific terms: in which way (which measures) and to achieve which (expected) result? 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Textiles

Apparel items not individually packaged

circulair
More information Less information
Criterion type
Technical requirements
Text

The Tenderer does not package items of apparel individually when supplying bulk deliveries. The Tenderer packages and supplies multiple items of apparel together. 

Explanation for procuring organisation

More information about surgical apparel can be found at De Groene Z: see link. 

Sources
UMC Utrecht
Copy link

Environmentally friendly detergents with Type 1 ecolabel mandatory

brons
Extra - mileuthermometer
goud
Milieuthermometer Zilver
kennis
More information Less information
Criterion type
Technical requirements
Text

Reusable products must be washed using environmentally friendly detergent with the ISO Type I environmental label 14024 or an equivalent form of evidence. 

Applicable forms of evidence
  • Valid certificate for ISO 14024 Environmental labels and declarations – Type I environmental labelling – Principles and procedures. 
  • Detergents that demonstrably comply with the requirements of the aforementioned ecolabel. 
  • Technical file from the manufacturer or an inspection report by an independent recognised body. 
Explanation for procuring organisation

Please note: this requirement does not apply to products that cannot comply due to the need for a special cleaning process.                                   

More information about surgical apparel can be found at De Groene Z: see link.

Sources
MVI criteria tool
Milieu Platform Zorg
Copy link

Weight of surgical apparel/Isolation apparel

circulair
More information Less information
Criterion type
Award criteria
Text

Surgical and/or isolation apparel with a lower weight scores higher. The lower the weight, the higher the tender scores. 

Assessment method

Tenders are compared based on the specified weight (in grams) of the items of apparel. The lighter the clothing, the higher the score (e.g. a linear scale or points assigned based on bandwidths). 

Explanation for procuring organisation

More information can be found at De Groene Z: see links. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Origin of textile fibres and use of chemicals

brons
Extra - mileuthermometer
goud
Milieuthermometer Zilver
circulair
kennis
More information Less information
Criterion type
Technical requirements
Text

The Tenderer indicates how it verifies the origin of textile fibres and the use of chemicals in the product and supply chain. 

Applicable forms of evidence

Systems, procedures, expertise, audits, certificates and practical examples that demonstrate that the Tenderer verifies the origin of textile fibres and the use of chemicals in its product and supply chain.

Monitoring and laboratory tests comply with: 
- ISO 17025 General requirements for the competence of testing and calibration laboratories.  
- ISO 17065 Conformity assessment – Requirements for bodies certifying products, processes and services. 
- ISO 19011 Guidelines for auditing management systems.  
- Or equivalent.

Explanation for procuring organisation

The Tenderer supplies the following data:

Origin of textile fibres: 

  • A description of the system used to trace the origin, composition and production methods of both natural and synthetic fibres (to which environmental criteria apply). 
  • Transaction data that can be used to trace and verify the origin of raw materials used in yarns and unbleached fabrics.  
  • Third-party certificates that show the origin of textiles are also sufficient.

Use of chemicals:  

  • A list of chemicals that are permitted for use by companies that dye, print and finish fabrics. 
  • Evidence that the list is shared with these companies, including an explanation of how compliance is verified. 
  • Information about the monitoring of laboratory tests that verify whether companies comply with the list. This monitoring process complies with the ISO 17025, ISO 17065 and ISO 19011 standards or equivalent standards.

Additional information about surgical apparel can be found at De Groene Z (see external link).

Sources
MVI criteria tool
EU GPP 2017
Copy link

Disinfection/cleaning

Environmentally friendly cleaning of instruments

co2
circulair
More information Less information
Criterion type
Technical requirements
Text

The cleaning and disinfection of medical instruments uses only environmentally friendly products in class B or C of the General Assessment Method (Algemene Beoordelingsmethodiek, ABM). 

Applicable forms of evidence

Declaration of use of class A cleaning product

Explanation for procuring organisation

Class A cleaning products are only permitted with the approval of the competent authority or if they are classed as essential by the Specialist in Sterile Medical Devices (Deskundige Sterilisatie Medische Hulpmiddelen, DSMH). A declaration must be supplied if class A products are used.

The General Assessment Method (Algemene Beoordelingsmethodiek, ABM) assesses the aquatic toxicity of substances and mixtures of substances (the extent to which substances are harmful to the water system). The ABM employs four categories: 

  • Z: hazardous substances.  
  • A: non-biodegradable substances. 
  • B: biodegradable substances. 
  • C: substances that naturally occur in surface water.

Source: Informatiepunt Leefomgeving
Promoting the use of more environmentally friendly cleaning products for medical instruments. Additional information can be found at De Groene Z: see links.                                                             

Sources
Milieu Platform Zorg
Copy link

Packaging

Mandatory explanation of packaging choices

circulair
More information Less information
Criterion type
Technical requirements
Text

The Tenderer explains the packaging choices. This explanation complies with the essential requirements in the European Packaging Directive and the Packaging Management Decree (Besluit Beheer Verpakkingen). 

Applicable forms of evidence
  • Evidence that demonstrates that the NEN-EN 13427 to NEN-EN 13430 standards have been applied by the Tenderer and/or its supplier.
  • NEN-EN 13427: Requirements for the use of European standards covering packaging and packaging waste
  • NEN-EN 13428: Specific requirements for the production and composition – prevention through reduction at source
  • NEN-EN 13429: Product reuse 
    NEN-EN 13430: Requirements for packaging to be classified as recoverable in the form of material recycling  

This evidence must also demonstrate that the chosen packaging complies with the essential requirements in the European Packaging Directive and the Packaging Management Decree (Besluit Beheer Verpakkingen). If the Tenderer uses another assessment framework, this must be demonstrated with another document. More information: see the link. 

Explanation for procuring organisation

The explanation covers:

  • The justification for the choice of packaging.
  • The assessment framework used to assess which packaging is optimal from an environmental perspective. The Tenderer does so using NEN-EN 13427 to NEN-EN 13430 inclusive or their own assessment framework.
  • The measures that have been taken and that will be taken to keep the volume and weight of packaging as low as possible. These measures must not negatively affect the functional requirements covering safety, hygiene and the acceptability of the packaged product.
  • The objective of this requirement is to provide the Client with information about the packaging choices made by the Tenderer and the role of the Tenderer’s packaging supplier in making the packaging material sustainable. The requirement encourages the Tenderer to select environmentally friendly packaging. 
Sources
MVI criteria tool
AIVG
Copy link

Reduction of non-recyclable plastic in packaging during contract term

circulair
More information Less information
Criterion type
Award criteria
Text

The Tenderer indicates how it will reduce the use of non-recyclable plastic in packaging during the term of the contract with the Client. The Tenderer also indicates how it will take account of this in the contract management process.

Assessment method

Assessment of the extent to which the Tenderer:

  • Provides clear and specific information about the measures it has implemented to reduce the use of non-recyclable plastic.
  • Convincingly demonstrates the feasibility of implementing these measures during the contract term.
  • Convincingly demonstrates that the measures contribute to the objective of increasing the percentage of recycled plastic.
     
Explanation for procuring organisation

Additional information about these products can be found at De Groene Z: see links.

Sources
UMC Utrecht
Copy link

Waste & packaging

circulair
More information Less information
Criterion type
Award criteria
Text

The product must comply with at least two of the following criteria:

  • The product generates no hazardous waste.
  • The product is not classified as hazardous waste (during normal use and disposal). 
  • The product consists of at least 10% chemical or closed-loop recycled material.
  • The product is recyclable.
  • The primary packaging contains more than 10% post-consumer recycled material.
  • The secondary packaging of the product contains more than 30% post-consumer recycled material. This does not apply to fibre-based materials such as wood. 
  • The packaging is recyclable.
Explanation for procuring organisation
  • Sales or primary packaging: packaging in direct contact with the product. Together with the product itself, this forms a single sales unit.
  • Grouped or secondary packaging: packaging in which multiple sales units are grouped.
  • Post-consumer material: material that is thrown away by end users and reused.
  • Closed-loop recycling: after use, materials are reused to produce the same product type. This ensures that the materials remain within the same chain and limits loss of value as much as possible. 
Sources
MEPA+
Copy link

Equipment packaging

circulair
More information Less information
Criterion type
Award criteria
Text

Packaging complies with the requirements of the EU Packaging and Packaging Waste Regulation (PPWR). This means that packaging must be fully recyclable from 2030 (except for contact-sensitive packaging). The tender will be assessed based on the action plan submitted by the Tenderer. 

Contractual provision

Action plan

Explanation for procuring organisation

The Packaging and Packaging Waste Regulation (PPWR) is a European regulation intended to reduce the volume of packaging and to promote the reuse and recycling of packaging. The first measures will come into force in August 2026. From 2030, rules including the following will apply: at least 40% of packaging must be reusable, single-use plastic packaging will be banned and the empty space in packaging must not exceed 50%. More information can be found at: see link. 

Sources
Zorg Inkoop Netwerk Nederland
Copy link

Deel jouw kennis, geef feedback of stel je vragen.